MTU Section through Radiator

Image by Tognum: MTU & MTU Onsite Energy
Section through a radiator
The exhaust gas drawn off for recirculation at a temperature of around 650 degrees Celsius is far too hot to be fed directly into the cylinders. For this reason, the exhaust gas is first cooled to around 120 degrees Celsius. The cooling system is optimally integrated into the engine design concept, so that the customer needs only to allow for a very small space requirement.
Category Archives: Radiator Key
Cobra #PSB3444 1/8″ Chrome Air Vent Key
Cobra #PSB3444 1/8″ Chrome Air Vent Key
- Cobra #PSB3444 1/8″ Chrome Air Vent Key
- COBRA PRODUCTS CO
1/8″, Chrome Air Vent Key, Bulk Packed.
List Price: $ 0.99
Price: $ 0.27
Recommended Reading
Key for an old radiator?
Question by Andy P: Key for an old radiator?
This is my first winter in my really old house. I am under the impression that the old radiators require some sort of key-like device that I would use to somehow release air trapped inside the radiators and make them work more efficiently.
Anyone know anything about this and where a guy like me could buy such a key? Thanks!
Best answer:
Answer by Devilish
They’re actually not as hard to find as you might think.
Many hardware stores still carry them, as do some plumbing and heating stores. I would check the local businesses before looking into any major chains.
EDIT TO ADD:
I also found one through Yahoo Shopping, if you can’t find one anywhere else.
http://www.usahardware.com/inet/shop/item/83120/icn/20-028027/ldr/6094420.htm
Add your own answer in the comments!
Recommended Reading
- keytix
- MTU Section through Radiator
- Cobra #PSB3444 1/8″ Chrome Air Vent Key
- how can I bleed a radiator when the radiator pin has became rounded, and doesn’t grip the bleed-key?
- 7 Keys To Living Life Successfully
- Plumb PAK Corporation AH829-7 Vent Key Bright Finish
- Where can I find a radiator bleeding key?
how can I bleed a radiator when the radiator pin has became rounded, and doesn’t grip the bleed-key?
Question by chrissteel1985: how can I bleed a radiator when the radiator pin has became rounded, and doesn’t grip the bleed-key?
Single radiator in bedroom
Freezing cold when heating on
Tried bleeding, key works on all other similar radiators in house but not this one. Radiator pin has became quite round and the bleed key is sort of hexaganol.
Only about 5 cm in between radiator and wall so difficult to get hand in…use pliers etc…
Any ideas or tools that could help?
Best answer:
Answer by bailey2204@sbcglobal.net
use a pare of canel locks
Add your own answer in the comments!
Recommended Reading
7 Keys To Living Life Successfully
7 Keys To Living Life Successfully
Discover the Keys that Open Doors to Living Life to the Fullest
7 Keys To Living Life Successfully
Recommended Reading
Plumb PAK Corporation AH829-7 Vent Key Bright Finish
Plumb PAK Corporation AH829-7 Vent Key Bright Finish
- ACE VENT KEY
- No. 5130C
- Heavy pattern
- Bright finish
ACE VENT KEY *No. 5130C *Heavy pattern *Bright finish *
Price: $ 2.99
Recommended Reading
Where can I find a radiator bleeding key?
Question by Duane G: Where can I find a radiator bleeding key?
My steam radiators needs bleeding, however the old tenants did not leave the radiator key. I need to know where I can purchase one.
Best answer:
Answer by xenon
Most hardware shops if in UK B&Q In USA Loweys Ask for radiator key ,please.
Give your answer to this question below!


